Transitory, biphasic, Type 1+2, 12.5/50kA
SKU: Transitoria, Bifásica, Clase II, 1P+N 15kA-1 Categories: ,

If you want to download the manuals please Register or Login


Module of protection against transient overvoltage, caused by atmospheric discharges, switching operations in electrical circuits and electrostatic discharges.

For circuits PHASE, phase+phase, it is not valid for circuits with phase+neutral, in this case you must use the V2T-12,5/50.

Avoid the damage that these transient overvoltages may cause to the equipment that is fed from the network.

strong>Values Nominal voltage Un 230Vac (L/L) Maximum voltage Uc 320Vac (L/L) 255Vac (L/PE) Frequency 50-60Hz Level of protection Up <1,5kV (L/L) /<1,5 kV (L/PE) Impulse intensity (10/350us) Iimp 12.5kA (L/L) 25kA (L/PE) Maximum discharge intensity (8/20μs) Imax. 50kA (L/L) 100kA (L/PE) Nominal discharge intensity (8/20μs) In 20kA (L/L) 25kA (L/PE) Surge response time ≤25ns Pre-existing protection fuse 160A gL Maximum cable section in terminals 35mm2 Temperature ranges -40º +80ºC / 80% Grade of protection IP20 No. of DIN modules 2 Assembly Rail DIN 35 Standards IEC 61643-11 / EN 61643-11 Class / Type I+II


Codes and references



You may also like…

Esta web utiliza cookies propias y de terceros para su correcto funcionamiento y para fines analíticos. Al hacer clic en el botón Aceptar, acepta el uso de estas tecnologías y el procesamiento de sus datos para estos propósitos. Ver Política de cookies