V2T-15
Transitoria, monofásica, Clase II, 15kA
Description
Module of protection against transient overvoltage, caused by atmospheric discharges, switching operations in electrical circuits and electrostatic discharges.
For circuits MONOPHASE, phase+neutral, it is not valid for circuits with phase+phase, in this case you must use the V2T-15B.
Avoid the damage that these transient overvoltages may cause to the equipment that is fed from the network.
This equipment DOES NOT PROTECT against voltage surges.
SPECIFICATIONS | strong>Values |
---|---|
230 VAC | |
Maximum voltage Uc | 320 VAC |
Frequency | 50-60 Hz |
≤1,5 kV | |
Maximum discharge intensity ((8/20μs) Imax | 15 kA |
Nominal intensity (8/20μs) In | 8 kA |
Maximum cable section in terminals | 16 mm² |
63 A gL | |
Dimensions (width x height x depth) mm | 18 x 90 x 71 |
Assembly | Rail DIN 35 |
Product standards | IEC 61643-11 / EN61643-11 |
Class | II |
Temperature ranges | -40º… +80º C |
Window | |
Average weight approx. | 140 g |
No. of DIN modules | 1 |
Codes and references
10002463 | V2T-15 – 1P+N 15kA |
---|