V3P 3.0
POP 3P+N, associable to any MCB
Description
Surge protection device permanent caused by increases in the network voltage, in three phase installations.
Surge equipment associated to any IGA or molded box in the market.
This equipment DOESN’T PROTECT against TEMPORARY surges.
| SPECIFICATIONS | Values |
|---|---|
| General | |
| Working tension | 240 VAC (N/L1, N/L2, N/L3) |
| Frequency | 50-60 Hz |
| Power consumption | 0,6 VA |
| Maximum section in terminals | 25 mm² (N, L1, L2, L3)
6 mm² (signals) |
| Alarm contact | 5A/30VDC – 5A/25VAC |
| Dimensions (width x height x depth) mm | 72 x 90 x 71 |
| Environmental margins | -20º…+70º C / 80% R.H. |
| IP20 | |
| Assembly | Rail DIN35 |
| No. of DIN modules | 4 |
| Permanent | |
| Trigger voltage | according to standard UNE-EN50550/63052 / IEC-63052:2019 |
| Response |
Codes and references
| 10003367 | V3P 3.0 – 3P+N, 400Vac, conexión universal / universal connection |
|---|
