Transitorio, trifásico, Clase I, 100kA
Surge protector, designed to protect lines where the risk of direct discharge of lightning is high in three-phase installations.
It is installed in the meter area or in the switchboard of the house, in parallel with the supply network, so that the service current does not pass through the equipment.
Class II protector must be installed downstream of this device.
This equipment DOES NOT PROTECT against power surges.
|Maximum voltage Uc||385 VAC|
|≤2 kV (PE/N) ≤ 2.5 kV (L/N)|
|Impulse intensity (10/350μs) Iimp||100 kA|
|Nominal intensity (8/20μs) In||100 kA|
|Maximum cable section in terminals||35 mm²|
|500 A gL|
|Dimensions (width x height x depth) mm||144 x 94 x 71|
|Assembly||Rail DIN 35|
|Product standards||IEC 61643-11 / EN61643-11|
|Temperature ranges||-40º… +85º C|
|Average weight approx.||930 g|
|No. of DIN modules||8|
Codes and references
V3T-100 – 3P+N 100 kA