VCT-3P100
Transitory, three-phase, Class I, 100kA, panel mounted and fused
Description
Transient overvoltage protection panel for meter decentralization, in three phase installations.
- >strong>Environmental protection according to standard: Box 360x270x170 IP56 transparent cover.
- Temporary overvoltages: Class 1, 100kA.
- >strong>Fuse holder base: Size 22×58, up to 100A maximum Direct power supply connection in the fuse holder.
- Fault indication contact: Switching contact.
It is necessary to install a Class II protector in the frame of the house.
This equipment DOES NOT PROTECT against voltage surges PERMANENTS.
SPECIFICATIONS | strong>Values |
---|---|
Nominal voltage Un | 240 VAC |
Maximum voltage Uc | 385 VAC |
Frequency | 50-60 Hz |
Protection level Up | ≤2 kV (PE/N) ≤ 2.5 kV (L/N) |
Impulse intensity (10/350μs) Iimp | 100 kA |
Nominal intensity (8/20μs) In | 100 kA |
Surge response time | ≤100 ns |
Maximum cable section in terminals | 35 mm² |
Maximum pre-fuse | 500 A gL |
Dimensions (width x height x depth) mm | 360x270x170 |
Assembly | Wall mural |
Product standards | IEC 61643-11 / EN61643-11 |
Class | I |
Temperature ranges | -40º… +85º C |
Degree of protection | IP56 |
Fault indication | Window |
Codes and references
10003114 | VCT-3P100 – Three-phase panel, 400Vac, 100kA, type 1, 100A fuses |
---|